Quick start

Get a development kit onto the management LAN and into the gateway dashboard. This is not a production hardening guide.

For r24 kits, use the supplied pre-flashed microSD. To rewrite a card, use a 32 GB (or larger) microSD and flash the .raw image. The r30 boots from onboard eMMC.

Hazard

• Connect sub-GHz antennas (or dummy loads) before applying power if the radio may transmit. Default software can TX on ~869.5 MHz.
• Supply 5–15 V, ≥2 A. USB-C from a weak port will brown out.
• Default SSH is root / root on 192.168.10.1. Treat the kit LAN as untrusted-to-the-world until you change that.

Pages

• Kit contents
• Antennas and power
• First boot and connect
• First mesh