Skip to content

No RF / no mesh

Symptom Check
commd inactive systemctl status kaonic-commd; SPI nodes for this revision (spidev6 vs spidev4)
TX but no RX Antennas; channel plan mismatch; legal power too low; CCA always busy
Gateway starts without radio pages Verify /etc/kaonic/kaonic_serial and /etc/kaonic/kaonic_machine
Mesh but no VPN allow_all_peers false without hashes; route expiry 45 s; TUN permissions
High LDPC errors SNR; MCS too aggressive; interference

GUI/iperf against IP:9090 isolates radio from Reticulum. If iperf works and mesh does not, debug kaonic-gateway / identities.